Download JDSU 6000/6000A Platform - Troubleshooting Input Queue Drops

Chapter 3 Starting up
Charging the battery
Charging the battery
Connecting the
mains adapter
1
At the top of the 6000/6000A Platform (upper left-hand corner), lift
up the power supply socket protector and plug in the mains adapter.
2
Connect the adapter to the mains.
The On/Off indicator starts to blink in green.
Use only the mains adapter supplied with the 6000 / 6000A
Platform. The adapter for some other electronic device may
appear to be identical, but entails a risk of damage to the 6000 /
6000A Platform.
Charging the
battery
On connection to the mains:
–
if the user does not press ON, the battery will start the charge.
–
when the user presses the ON key, the instrument starts up and the
battery will charge during use.
Once the battery is fully charged, the Charge indicator is lit in solid green
on the front panel.
When the Charge indicator on the front panel is blinking red, this mean
the power supply is not compatible with the battery used. Charge is
disabled.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
Battery charge
level display
When the battery is installed in the instrument, a battery icon is displayed
in the top right-hand corner of the screen. Example
Icon
Battery charge level
From 100% to 70%
From 70% to 40%
From 40% to 10%
From 10% to 0%
16
User Manual
760000002/10