Download Hitachi Microcomputer Development Environment System SH Series

4.3
Setting up the E6000 Emulator
Before downloading a program to the E6000 emulator, you first need to set up the target MCU
conditions. The following items need to be configured:
• The device type
• The operating mode
• The clock source
• The user signals
• The memory map
The following sections describe how to set up the E6000 emulator as appropriate for the tutorial
program.
4.3.1
Configuring the Platform
To set up the target configuration:
• Choose Configure Platform… from the Setup menu to set up the conditions for the selected
platform.
• The following dialog box will be displayed:
Rev. 1.0, 06/02, page 44 of 84