1
Download OPERATION MANUAL
Transcript
Section 7-1 PLC Setup Pulse Output 0 Origin Search/Return Initial Speed Programming Console setting address Word Bit 258 259 Settings 00 to 15 00000000 to 00 to 15 000186A0 hex (See note.) Default 00000000 hex Function Related Auxiliary Area flags/ bits Specifies the starting speed (0 to --100,000 pps) for the pulse output 0 origin search and origin return operations. Time when setting is read by CPU Unit At start of operation Note When the CX-Programmer is being used to make the setting, the setting is input in decimal. Pulse Output 0 Origin Search High Speed Programming Console setting address Word Bit 260 261 Settings 00 to 15 00000001 to 00 to 15 000186A0 hex (See note.) Default 00000000 hex Function Related Auxiliary Area flags/ bits Specifies the high speed setting (1 to --100,000 pps) for pulse output 0 origin search operation. Time when setting is read by CPU Unit At start of operation Note When the CX-Programmer is being used to make the setting, the setting is input in decimal. Pulse Output 0 Origin Search Proximity Speed Programming Console setting address Word Bit 262 263 Settings 00 to 15 00000001 to 00 to 15 000186A0 hex (See note.) Default Function 00000000 hex Specifies the proximity speed setting (1 to 100,000 pps) for pulse output 0 origin search operation. Related Auxiliary Area flags/ bits Time when setting is read by CPU Unit At start of operation Note When the CX-Programmer is being used to make the setting, the setting is input in decimal. Pulse Output 0 Search Compensation Value (Origin Compensation) Programming Console setting address Word 264 265 Settings Bit 00 to 15 80000000 to 00 to 15 7FFFFFFF hex (See note.) Default --- Function Sets the pulse output 0 origin compensation (-2,147,483,648 to 2,147,483,647). Related Auxiliary Area flags/ bits --- Time when setting is read by CPU Unit At start of operation Note When the CX-Programmer is being used to make the setting, the setting is input in decimal. 221
