Download Rural HSPF modelling Technical Guide

7. Create HSPF Model (Part 2 – FIO)

If not already open, open WinHSPF and load the saved HSPF model (File>Open)
7.1 Add Pollutant



Click the Pollutant Selection button
In the Pollutant Selection window, select F.COLIFORM from the Available pollutants list and click
Add ->.
The Pollutant Selection window should look the same as figure 7.1.
Figure 7.1: WinHSPF – Pollutant Selection

Click OK.
7.2 Edit Control Cards




Click the Control Cards button
In the Control Window Selection window that opens select Descriptions.
In the Control Cards window select the Reaches/Reservoirs tab.
Uncheck HTRCH (this requires additional temperature data) (figure 7.2).
52