Download 4000 Base Unit

MTS4000 US rev00.book Page 89 Jeudi, 18. décembre 2008 1:41 13
Chapter 8 File management
File menu
Storage media
built into the 4000
Platform
–
An internal memory
–
An extended internal memory, on option
External USB The Base Unit is equipped with 2 USB ports as standard. One of these
storage media can be used to connect an external storage medium, in particular a USB
memory stick.
NOTE
Although two USB ports are present, it is not possible to use simultaneously more than one external USB storage medium.
For the high capacity USB sticks of 2Go or higher, only the memory
sticks provided by JDSU are recommended.
USB memory stick connection
Insert the USB memory stick in one 8000 Base Unit's USB port.
A sound is emitted to confirm the successful insertion and recognition of a USB memory stick.
Then, the icon
is displayed in the upper banner to inform the
user the USB stick is ready to be used.
Do not connect a USB memory stick while a USB printer is printing.
If the Base Unit does not emit a beep, disconnect and reconnect the USB
memory stick (do not perform this action too quickly - wait 5 seconds
between the disconnection and reconnection).
If after several trials, no beep is emitted and no icon is visible, two problems can be considered:
–
A previous USB memory stick has not been properly disconnected.
Go to “USB memory stick disconnection” on page 90
–
the USB memory stick is not detected by the Base Unit: use another
USB memory stick or another storage medium (with the 8000 Base
Unit only) or transfer data via Ethernet (see “Accessing the internal
memory or the USB memory stick of the 4000 Platform via a PC” on
page 36).
In case of errors, the icon
is displayed:
–
The stick is not formatted
–
The stick has been removed without prior Eject USB key use and
some applications are still using it.
User Manual
770000002/00
89