Download USER MANUAL - Kramer Electronics

Defining the VP-81SID 8x1 Digital STEP-IN Switcher
#
12
13
14
15
16
17
18
19
8
Feature
LOCAL AUDIO INPUTS
DVI
HDMI
HDMI OUT Connector
AUDIO OUTPUTS
+L–G+R–
L
R
S/PDIF
PROG TERM DIP-Switch
20
RS-485 3-way Terminal Block
21
22
RESET Button
REMOTE IR 3.5mm Mini Jack
Function
Connect to the local DVI audio source
Connect to the local HDMI audio source
Connect to the local HDMI acceptor
Connect to the balanced audio acceptor (see Section 6.1)
Connect to the unbalanced audio acceptor left channel
Connect to the unbalanced audio acceptor right channel
Connect to the digital audio acceptor
DIP-Switch 1: Sets the RS-485 bus termination (see Section 6.4.2)
Up = Off, Down = On. Default = On
DIP-Switch 2: For the use of Kramer service personnel only
Connect to RS-485 port on a remote controller or another VP-81SID.
Connect: G to Ground, A to A, and B to B (see Section 6.4)
Press while power-cycling the device to reset parameters to factory default values
Connect to an external IR receiver unit for controlling the device via an IR remote controller
(see Section 4.1)
KRAMER: SIMPLE CREATIVE TECHNOLOGY