Download The ATEUS

The control
Enter the correct password and the character
. If the password is valid,
a long tone is heard which lasts for the preset time (usually 5 s). During this
time, switch 1 or switch 2 is closed, (switch 1 usually controls the electric lock). If
the password is invalid, the door communicator sends the "refusal" signal.
6.2. The classic button telephone
In this mode, it is possible to "dial" an arbitrary number. The key
serves
is used to hang up. Authorisation for "outgoing" calls
for pick up and the key
must be cancelled if needed at the branch telephone exchange. The dialling
type (tone, pulse) is set in the programming mode. If pulse dialling is set, the
character
functions (after picking up) as transition to tone dialling - similarly
as on any other telephone.
6.3. Transmission of tone dialling during an outgoing call
This function allows to send the tone dialling after establishing connection
with one of the programmed numbers. It is used in combination with automatic
information systems, voice boxes etc., which require from the calling person
selection of a service using tone dialling. This function thus does not allow to
reach other than programmed numbers.
19