Download MAZU PROFILER

Transcript
System Verification
Data sources
Profiler reports its sources of traffic data on the System Information Æ
Devices/Interfaces page. Using list entries or mouse-rollover pop-ups,
this page provides the following information for devices and their
interfaces from which Profiler is receiving data:
Devices
• Status
• IP address
• Device type (in terms of what type of data is being sent)
• NTP synchronization (Mazu Sensors and Mazu Regional Gateways
only)
Device Interfaces
• Status
• IP Address:Index of interface
• Interface name (as assigned on the data source device)
• Interface label (as assigned on Profiler)
• MAC address
• Interface type (e.g., Ethernet CSMA/CD RFC3635)
• MTU (maximum transmission unit)
• Traffic rate (traffic in bits per second that Profiler tracks)
• Utilization (percent of device speed that Profiler currently sees being
used)
Much of this information must be obtained from the data source devices.
For devices that send data directly to Profiler, Profiler uses SNMP to
obtain the information. For sources that send data to Mazu Regional
Gateways, the Regional Gateways use SNMP to obtain the information.
They then send it to Profiler.
You can specify which version of SNMP and what community name
Profiler or Regional Gateways use to contact the devices. You can assign
labels to interfaces. Profiler uses these labels when displaying interface
information.
66