Download MITSUBISHI

Transcript
1. Before starting use
1. Before starting use
The manual is in the CR-ROM as the Adobe PDF file.
D:/Doc/BFP-A8090.pdf
* Example for the CD-ROM drive is “D:”.
For reading the manual, Adobe Acrobat Reader Ver.5.0 or more is required.
If Adobe Acrobat Reader isn’t installed, please download from following Adobe Systems Incorporated
URL(As of December, 2004).
URL: http://www.adobe.com/
This chapter explains the precautions to be observed when using this software.
1.1. Using the instruction manual
The contents of this instruction manual are briefly explained in this section. Refer to the required section as
necessary.
1. Before starting use
The precautions before starting use are explained. Please read before starting use.
2. Preparation before use
The methods of starting up this software are explained.
3. Basic function and windows operations
The functions of this software, and the basic windows operations required for using this software are
explained.
4. Starting use
This is a tutorial section for learning the series of operation methods when using this software for the
first time.
5. Program editing tool
A detailed explanation of making and saving the robot program.
6. Monitoring
All of the information in the currently connected robot controller can be constantly displayed.
7. Parameter editing tool
The parameters in a Robot controller can be referred to and rewritten.
8. Backup/restore
A backup of the data in the robot controller can be downloaded to the personal computer, and the
backup data saved in the personal computer can be uploaded to the robot controller.
9. Remote maintenance
The data of a robot at a remote location can be monitored and serviced over a telephone line.
10. Simulation
Confirmation of robot program operation with off-line simulation using CG [Computer Graphics], and
calculation of cycle time
The Simulation function becomes correspondence only of a standard version(STD).
Using the instruction manual 1-1