Download ho(v)-4-2 side thrusters

KTE
USER'S MANUAL OF
Thruster Control System ( KT - TCS )
REV
PAGE : 3
OF 43
DOCU. NO :
1. Introduction
1.1. Use
This manufacture is a private controller of the thruster which is used when a
ship enters or leaves a port, the main functions of the manufacture are to detect
control input, feedback value, and to control blade angle of the thruster with the
most optimal condition by follow up control algorithm
Control command is done by port wing, stb'd wing as well as W/H, and the
action is done with the command of related control position, which can be
changed simply by operating a button.
Each parameter which is necessary to control can be identified and changed
with parameter setting equipment.
1.2.
Basic Specifications
1.2.1. Main control panel ( Bow / Stern )
1) Standard specifications
- Supply voltage : DC 24V
- Current : 3A
- Temperature range : Ot: ~ 70 °C
- Output contact : 10A ( 250VAC ) for magnet contact
2A ( 30VDC ) for signal output
2) Main control board
- 8 bit micro-controller
- Digital dimmer
3) Input specifications
- Digital input : 20 channel
- Analog input : 7 channel
- Control dial : potentionmeter 2K ohms
KTE CO., LTD.