Download ShaneAO Instrument Document
Transcript
alignment of the wavefront sensor optics (with the field stop closed down enough to create a point source at the input of the WFS), masking of Rayleigh light or close binaries, and masking of ghosts or stray light (with the field stop set at the size of the subaperture, 6 arcseconds). The grid of the lenslet array/detector subapertures must be aligned with the grid of MEMs actuators in the AO relay. The WFS mount shown in Figure 48 meets all of these requirements. The bottom linear stage provides focus adjustment for the entire wavefront sensor package. The linear stage perpendicular to the bottom stage allows changing between two (with room for an upgrade to three) subaperture modes. Each of the three optical relays sits in v-grooves that travel perpendicular to the optical axis to center the relay between the iris and detector. The iris is a motorized, adjustable iris that can close down completely. The Scimeasure “Big Joe” wavefront sensor camera is mounted within a flexure mount and can move small amounts in the x and y directions through the adjustment of New Focus picomotors to align the detector with the lenslet array. The entire package is mounted on feet that allow adjustment in height and tip/tilt, and nudgers provide adjustment in x (parallel to the bench) to allow alignment with the MEMs grid. Figure 48 The Shane AO WFS mechanical package. 67