Download User`s Manual
Transcript
5. Each Component Function Component Function LED: POWER, ACCESS, STATUS There are 3 LED in front of this product. Table 5.2. Display Contents of LED LED name State POWER LED Display contents OFF Indicates that this product is switched off. ON (Green) Indicates that this product is switched on. ACCESS LED ON (Orange) Indicates that the SATA device is being accessed. STATUS LED OFF You can control the behavior of LED from the user application. *1 ON (Red) You can control the behavior of LED from the user application. *1 *1 API that controls STATUS LED is available. For more information, visit the CONTEC's Web site. DC Power Input Connector: DC-IN To supply the power, always use the power supply listed below. Rated input voltage : Range of input voltage : Power capacity : 12 - 24VDC 10.8 - 31.2VDC 12V 2.6A or more, 24V 1.5A or more Table 5.3. DC Power Connector Connector type 9360-04P (mfd. by ALEX) Pin No. 4 3 2 1 Signal name 1 GND 2 GND 3 12 - 24V 4 12 - 24V Applicable connector on the connector side Housing Contact : : 9357-04 (mfd. by ALEX) or 5557-04R (mfd. by MOLEX) 4256T2-LF (AWG18-24) (mfd. by ALEX) or 5556 (AWG18-24) (mfd. by MOLEX) Rise time of power supply Voltage 2 - 30mS 12V Time Figure 5.3. Graph of Rise Time of Power Supply BX-220 User’s manual 55