Download User Manual - Projector Central

Chapter 4 Settings — [PICTURE] menu
Note
ff When [COLOR MATCHING] (x page 59) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER].
Adjusting desired white balance
1) Press as to select [COLOR TEMPERATURE].
2) Press qw or the <ENTER> button.
ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press qw to select [USER].
4) Press the <ENTER> button.
ff The [COLOR TEMPERATURE] screen is displayed.
5) Press as to select [WHITE BALANCE].
6) Press the <ENTER> button.
ff The [WHITE BALANCE] screen is displayed.
7) Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8) Press the <ENTER> button.
ff The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
9) Press as to select [RED], [GREEN], or [BLUE].
10)Press qw to adjust the level.
Item
[RED]
[GREEN]
[BLUE]
Operation
Adjustment
Press the w button.
Deepens red.
Press the q button.
Weakens red.
Press the w button.
Deepens green.
Press the q button.
Weakens green.
Press the w button.
Deepens blue.
Press the q button.
Weakens blue.
Range
[WHITE BALANCE HIGH]: 0 - 255 (factory default is 255)
[WHITE BALANCE LOW]: -127 - 127 (factory default is 0)
Note
ff Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
ff The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns (x page 82). Make sure to set [COLOR TEMPERATURE]
while projecting input signal.
Changing the [USER] name
1) Press as to select [COLOR TEMPERATURE].
2) Press qw or the <ENTER> button.
ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press qw to select [USER].
4) Press the <ENTER> button.
ff The [COLOR TEMPERATURE] screen is displayed.
5) Press as to select [COLOR TEMPERATURE NAME CHANGE].
6) Press the <ENTER> button.
ff The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
7) Press asqw to select the text, and press the <ENTER> button to enter the text.
8) Press asqw to select [OK], and press the <ENTER> button.
ff The name set to color temperature is changed.
48 - ENGLISH