Download - Bausch + Lomb

Transcript
7 Troubleshooting and Maintenance
IV Pole Module Messages
ID
EIV01
Text Message
Suggested
Action(s)
The IV Pole controller was not detected in the system. The motorized IV
Pole function is not available.
The IV Pole controller software version is not compatible with this
software version IV Pole function is not available.
The IV Pole controller has failed to respond to a settings command. The
module settings have been re-sent to the module.
The IV Pole controller has reset. The module settings have been re-sent to
the module.
The IV Pole position cannot be determined.
EIV02
EIV03
EIV04
EIV05
EIV07
The IV Pole is not detecting the home position switch or the IV Pole
motor may have failed.
The IV Pole panel button sensors have failed or the buttons have been
activated continuously since being powered on.
EIV08
SG01
SG02
SG04
SG04
SG62
SG04
SG62
SG04
SG65
SG64
SG04
MultiMedia Center (MMC) Module Messages
ID
Text Message
Suggested
Action(s)
MMC01
The multimedia center was not detected in the system.
MMC02
The multimedia center software version is not compatible with this
software version. The video overlay function is not available.
The multimedia center has failed to respond to a settings command. The
module settings have been re-sent to the module.
MMC03
110017243EN Rev. H
SG74
SG73
SG02
SG04
Operator's Manual
7-7