Download - Bausch + Lomb
Transcript
7 Troubleshooting and Maintenance IV Pole Module Messages ID EIV01 Text Message Suggested Action(s) The IV Pole controller was not detected in the system. The motorized IV Pole function is not available. The IV Pole controller software version is not compatible with this software version IV Pole function is not available. The IV Pole controller has failed to respond to a settings command. The module settings have been re-sent to the module. The IV Pole controller has reset. The module settings have been re-sent to the module. The IV Pole position cannot be determined. EIV02 EIV03 EIV04 EIV05 EIV07 The IV Pole is not detecting the home position switch or the IV Pole motor may have failed. The IV Pole panel button sensors have failed or the buttons have been activated continuously since being powered on. EIV08 SG01 SG02 SG04 SG04 SG62 SG04 SG62 SG04 SG65 SG64 SG04 MultiMedia Center (MMC) Module Messages ID Text Message Suggested Action(s) MMC01 The multimedia center was not detected in the system. MMC02 The multimedia center software version is not compatible with this software version. The video overlay function is not available. The multimedia center has failed to respond to a settings command. The module settings have been re-sent to the module. MMC03 110017243EN Rev. H SG74 SG73 SG02 SG04 Operator's Manual 7-7