Download QuickDesigner Software, Communications Manual, GFK

Transcript
02:FF:11
The BBRAM has a checksum error. Since the BBRAM is invalid, the inputs will be
cleared. This is a non-critical error and it will only be displayed for 2 seconds after power
up or reboot. It is possible that the power was lost or the QP was rebooted at the exact
instance we were updating the BBRAM and therefore the data in the BBRAM is invalid.
However, if this error occurs often, the BBRAM in the unit may be defective.
Communications, GFK-1856
DeviceNet • 87