Download DP4 User Manual

Transcript
Powering the DP4:
The DP4 has two methods for powering:
* Batteries, using the interchangeable battery plates
* AC/DC Power, using the Barrel Power input on the back of the
unit.
The Power Switch
The DP4 has a dual position power switch that distinguishes
between using battery power, or the rear DC barrel power input.
The switch has a depressed state (down) and a raised state (up).
To use batteries, the switch should be DOWN. To use AC/DC
Power via the barrel power input, the switch should be UP.
8|Page