Download Section 10: Commands - Flint Machine Tools, Inc.

Operator Manual
Fadal
3) The parameters modify or control the command. For Example, the
command above is for execution of the program, and the parameters
control how the program is to be executed. Parameters are represented by
numbers only. After each comma only a number can appear, or the
message “PARAMETER ERROR” will appear.
EXAMPLE:
AU,50 <ENTER>This is correct
AU,N50 <ENTER>This is incorrect
1) The first parameter comes after the first comma, the second parameter
comes after the second comma and so on. If the third parameter is the only
parameter used, three commas must appear, etc.
EXAMPLE:
AU,,,3 <ENTER>
This example uses only the third parameter. The control will run the program
from the beginning, to the end, under dry run option three.
February 2001
Section 10: Commands
67