Download Integrated Development System Technical Reference

Program Messages
Insufficient Memory Available [c813]
Description
DOS memory is allocated at run-time to hold programming, readback, and verification data. If there is
insufficient base memory available in DOS for the current operation, the above message will be displayed.
Solution
Try to allocate more base memory in DOS. This can be achieved by removing unnecessary TSRs and
device drivers.
Invalid Line (line) in hex file “Filename” [c814]
Example
Invalid Line (345) in hex file “4bitalu.hex”
Description
Each line of a hex format file applied as input to the program should consist of a record field following a
specific structure. If any line in the input file does not follow this structure, the message above will be
displayed.
Solution
Verify that the input file contains the necessary hex data in the correct format. Check to make sure the
input file is not corrupted.
Checksum mismatch at line line in file “Filename” [c815]
Example
Checksum mismatch at line 245 in file “4bitalu.hex”
Description
Each line in a hex format file has a checksum appended. This checksum is used to validate the integrity of
the line. If, when reading the contents of a hex format file, any line fails a checksum test, then the above
message will be reported.
Solution
Check that the hex format file has not been corrupted.
2-79