1
Download KX-TD500 Programming Guide
Transcript
Maintenance Parameter Extension Card (1-24) Default None Value Range None, XXX: YYY [XXX: Card No. (101-314), YYY: Card Type] Description/Function Specifies the extension card number and its type, which will be used in case of Power Failure Transfer. Notes • DPTs and some APTs cannot be used during a power failure. • Auxiliary connections between the Trunk card and Extension card should be made as per System Programming so that conversation is maintained when power is restored or TSW is recovering. Reference Programming Guide • 1.4 Fault Recovery/Diagnostics (F/G) – Power Failure Transfer • 2.9.1 Auxiliary Connection for Power Failure Transfer (I/M) • 1.2 Slot Assignment (P/G) 321
