Download User guide (EN) for Explorer 727 - E-SAT

Chapter 4: Using the web interface
Setting up the IP handset compatibility
If you are connecting your Thrane IP Handset(s) to the terminal through a separate router with
NAT, you must use IP handsets with software version 1.8 or newer and set up the handset
compatibility in the web interface of the terminal as described below.
To see the software version of your IP handset, select MENU > Status > Software version in the IP
handset.
To change the IP handset compatibility, do as follows:
1.
Select Settings > IP handsets > Server settings.
2. Select the IP handset compatibility as follows:
• If you are connecting your IP handset(s) through a separate router with NAT, select
Version 1.8 or newer and use IP handsets with software version 1.8 or newer.
• If you are connecting your IP handset(s) directly to the terminal or through a switch without
NAT, select Version 1.7 or older. In this case you can use IP Handsets with any software
version.
98-126882-D
Setting up the interfaces
87