Download G-46.F4000 - Products

G-46.F4000
FUNCTIONS
Changer or vending machine – Which device ends
the vending operation? (4-price devices only)
The changer can either end the vending operation
independently (internal reset) or after it has received a reset
signal from the machine (external reset).
With an internal reset, the vending operation is terminated for the
changer after it has sent a signal to the vending machine (100 or
300 ms) as soon as the customer’s credit has reached the price. The
vending machine can vend the product.
With an external reset, the vending operation for the changer is only
ended when it receives a reset signal from the vending machine either
via the separate reset signal line (L8) or via the combined reset and
inhibit signal line (L6).
And if no product is given out ...?
(cigarette mode, 4-price devices only)
When the vending operation is terminated via a reset signal
from the vending machine (see above), the changer can be
set so that a renewed product selection is possible, if the
vending machine does not give out any goods, following the
first product selection, and does not send, following an
adjustable period of time, ("cigarette mode time") a reset
signal to the changer.
There is no "forced vend", i.e. the credit would be paid out again if the
customer selects a product only once.
Simplex V prices
Usually, the prices for Simplex V devices are set in the vending
machine.
However, after having enabled the price holding function, up
to 30 prices can be set in standard changers or up to 60 prices
in serial changers, if the product-specific single turnovers are
important for the audit.
By means of the prices the changer is then able to data-manage the
audit data of each product.
National Rejectors, Inc. GmbH, Buxtehude
29