Download PCOM-B219VG-VI-ECC User`s Manual

Troubleshooting
8. Switch “Off” the Power Supply when you finished the update
process.
9. To short the JP9 jumper from 1-2 short to 2-3 short 5 seconds
then set back to 1-2 short. (Clear CMOS)
10. Switch “ON” the Power Supply then press the “del” key to
BIOS to load “Restore Defaults” and then select “Save Changes and
Exit” option.
Note:
Please visit our technical web site at
http://www.portwell.com.tw
For additional technical information, which is not covered in this manual, you can
mail to [email protected] or you can also send mail to our sales, they will be
very delighted to forward them to us.
54