Download Decimator D3 - SX

2.0 Reference Section
2.5.1
2-9
Main Screen
The main screen consists of four areas, as shown in Figure 2-3.
The Plot Area, to the center, consisting of the grid and plot of the signal. Marker values show up at
the top of the plot area.
The North Settings Bar, along the top, consisting of the connection LED, RBW, Span, # Averages,
Start Frequency, Center Frequency, and Stop Frequency.
The West Settings Bar, along the left, consisting of the Reference Level, Reference Select, Scale per
Division, and minimum displayed power level.
And finally, the South Mouse Indicator Bar, along the bottom, consisting of the mouse cursor
positions frequency and amplitude.
The Screen Area will automatically update the values of the various parameters in real time as the
signal changes or the user changes parameters.
Figure 2-3 Decimator GUI Main Screen
Decimator D3 User’s Manual
SED Systems (Proprietary)
130825(2)