Download USER MANUAL
Transcript
Chapter 5: Using the web interface Selecting the GPS antenna The EXPLORER 500 can obtain the GPS position in two ways: Using the built-in GPS antenna or using the BGAN I-4 antenna. If the terminal is placed in an open location with a wide view to the sky, the GPS antenna is the better choice, because it is omnidirectional. If, however, the terminal is placed in a location with a limited view, e.g. close to a wall or similar, the I-4 antenna is better, because it is directional. To select which GPS antenna to use for acquiring the GPS position, do as follows: 1. Select SETTINGS > Advanced from the left navigation pane. 2. Select which antenna to use when acquiring the GPS position. You have the following options: • Auto. The standard factory setting is used. • GPS. The internal GPS antenna of the EXPLORER 500 is used for acquiring the GPS position (best choice in open areas). • I-4. The BGAN I-4 antenna is used for acquiring the GPS position (best choice in areas with a limited view to the sky). 3. TT 98-122274-R Click Apply. Setting up the interfaces 122