1
Download MiniARM-2104 - SPJ Systems
Transcript
MiniARM-2104 User’s Manual Page 19 Pin 11 = GND Pin 12 = Vcc The 8 pins of port P0 are pulled-up with on-board resistors of value 10K. JP3 Connector: This is a dual line, 20 pins (10X2) connector. The pin description is: Pins 1,2 = Vcc Pins 3,5,7,9,11,13 = P0.4 to P0.9 Pins 15,17= P0.2, P0.3 Pins 4,6 = P0.1,P0.0 Pins 8,10,12,14,16,18= P0.16 to P0.21 Pins 19,20 = GND Referring to Figure1, the pin in left-top corner of JP3 is pin number 1 and right-top corner is pin number 2. Pins on the left are numbered 1,3,5…19
