Download Manual - 999 Mitsubishi

DETAILS OF INPUT AND
OUTPUT SIGNALS
Item
Code
Number
Description
H0000 to HFFFF: Last two alarm definitions
b15
b8 b7
H74 Second alarm in past
Monitor Alarm definition
H0074 to
H0077
b0
Latest alarm
H75 Fourth alarm in past Third alarm in past
H76 Sixth alarm in past Fifth alarm in past
H77 Eighth alarm in past Seventh alarm in past
Refer to the alarm data table (page 58)
Reads the set frequency from the
⋅ H0000 to H9C40: Increments
inverter RAM.
0.01Hz
Reads the set frequency from the
Set frequency read
(0 to 400.00Hz)
H006E
inverter EEPROM.
(RAM and EEPROM) *2
⋅ To change the running speed
consecutively, always write data
Writes the set frequency to the
Set frequency write (RAM) *2
H00ED
to the inverter RAM.
inverter RAM.
Writes the set frequency to the inverter ⋅ Setting from remote resisters
Set frequency write
H00EE
can be made.
RAM and EEPROM.
(RAM and EEPROM) *2
*2 When speed display is set using Pr. 37 and Pr. 144, the monitor is 1r/min increments.
Set frequency read (RAM) *2
56
H006D