Download Chapter 2 Port Configuration

Authkey is authentication key. Unauthenticated key is in the range of 16 byte (using md5
key folding) or 20 byte (using SHA-1 key folding). Authenticated key is in the range of 16
byte (using md5 key folding) or 24 byte (using SHA-1 key folding).
Privkey is encrpted key. Unencypted key ranes from 16 byte, and encrypted key ranes
from 16 byte.
Keyword encrypt-authpassword、encrypt-authkey、encrypt-privpassword、encrypt-privkey
are only used in command line created by compile to prevent leaking plain text password
and key. When deconfiguring SNMP, user cannot use above keywords.
For example：
！Add user “user1” for local engine to group “grp1”，and configure this user not to use
authentication and encryption.
QTECH(config)# snmp-server user user1 grp1
！Add user “user2” for local engine to group “grp2”，and configure this user to use md5
authentication and non-encryption with the auth-password to be 1234
QTECH(config)# snmp-server user user2 grp2 auth md5 auth-password 1234
！Add user “user3” for local engine to group “grp3”，and configure this user to use md5
11-47