Download 023K - Advanced Energy

BA_REFUSOL 008K-023K_V11.3_EN
Error code
Error message
Description
Action
Service.
0x0E000D
Phase temperatures
0x0E0013
Preload
0x0E0015
Preload protection
0x0E0016
Main contactor DC
0x0E0017
Main contactor AC
0x0E0018
Overtemperature 4
0x0E0019
Grid voltage 2
0x0E001A
Solar cell voltage 1
0x0E001B
Solar cell voltage 2
0x0E001C
Supply voltage
0x0E001D
Overtemperature 5
0x0E001E
Communication CR
Do nothing. The inverter will
acknowledge the error automatically. If problem occurs
repeatedly, contact Service.
The DC +/− may be interchanged.
Preload cannot reach the
Please check the DC wiring. If
preload voltage.
you consider the wiring to be
in order, contact Service.
Do nothing. The inverter will
Preload protection cannot be acknowledge the error autoswitched.
matically. If problem occurs
repeatedly, contact Service.
DC contactor cannot be
Please contact Service.
switched.
AC contactor cannot be
Please contact Service.
switched.
Do nothing. The inverter will
Overtemperature at
acknowledge the error automicrocontroller
matically. If problem occurs
repeatedly, contact Service.
Arrange for grid instantaneous
voltage to be checked by an
electrician if the error mesNominal grid voltage is outsage remains active. If the
side of the grid limits.
grid instantaneous voltage is
within the normal range, contact Service.
Do nothing. The inverter will
The measured DC link voltacknowledge the error autoage of the power section is
matically. If problem occurs
too high.
repeatedly, contact Service.
Do nothing. The inverter will
The measured solar voltage
acknowledge the error autoof the power section is too
matically. If problem occurs
high.
repeatedly, contact Service.
This error typically occurs
shortly before the element
‘goes to sleep’ or shortly after
Faulty supply voltage at the
it ‘wakes up’. Do nothing. The
power section
inverter will acknowledge the
error automatically. If problem
occurs repeatedly, contact
Service.
Do nothing. The inverter will
Overtemperature at control- acknowledge the error autoler
matically. If problem occurs
repeatedly, contact Service.
Do nothing. The inverter will
Communication malfunction
acknowledge the error autobetween control and regulamatically. If problem occurs
tion unit and power section
repeatedly, contact Service.
Temperature difference between the phase modules is
too high.
53