Download PT568 User Manual

Contents
1. Open Package Inspection........................1
Firstly, please take the radio out of the pac-
2. Preparation.............................................2
kage box carefully. We recommend checking
2.1 Charge the battery................................3
the supplied accessories in the following table
2.2 Install/Remove the battery.....................4
2.3 Install the antenna................................5
2.4 Install external speaker/MIC.................6
2.5 Install the belt clip..................................7
2. Preparation
2.1 Charge the battery
Insert the cable plug of
Antenna
Power
Adapter
before disposing the packing material. If any
the adapter into the jack at
the back of the charger.
Then insert the adapter into an
article is found lost or damaged, please contact
applicable AC power output socket. The three LEDs
the distributor without delay.
will flash for about one second, and then the green LED
will be constantly on when the charger is normal.
Quantity
3. Radio Overview........................................8
Accessories
4. Basic Operation.......................................9
Antenna
1
5. Functions of Programmable Buttons.......10
Battery
1
turn off the radio before
Belt Clip
1
inserting it into the charger.
Rapid Charger
1
Power Adapter
1
Hand Strap
1
Instruction Manual
1
6. Auxiliary Functions.................................11
7. Wired Clone Mode................................. 12
8. Troubleshooting Guide...........................13
9. Major Specifications...............................14
10. FCC Notice.........................................15
1
1. Open Package Inspection
Battery
Rapid
Charger
Insert the battery to be charged or the radio into the
charger. Do remember to
Make sure that the battery
and the charger terminal
are fully and reliably
Belt Clip
Hand Strap
connected with each other.
When the red LED is on, the charging starts.
2