1
Download MX Component Version 3 Operating Manual
Transcript
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE MELSOFT (6) Setting the logical station number (Setting on communication setting wizard) Logical station number setting will be described using the system example for Q series-compatible E71. 1) Start the communication setup utility and select the communication setting wizard. 2) Type "2" in Logical station number and click Next> . 3) Make settings as indicated below and click Next> . PC side I/F Connect module Protocol Network No Station No Time out : Ethernet board : QJ71E71 : TCP :1 :2 : 60000 4) Make settings as indicated below and click Next> . PLC side I/F Module type Host (IP Address) Station No : Ethernet module : QJ71E71 : 192.168.0.1 :1 (To the next page) 6 - 27 6 - 27
