Download PEMED - Patient Monitors, Defibrillators, Telemetry, Stress test

9/15/2014
PEMED - Patient Monitors, Defibrillators, Telemetry, Stress test, Vascular
each channel has individually adjustable low and high BPM alarms
low battery warning
QRS/ALM record
strip chart recorder has adjustable speed and time/date stamp
Shipping weight is about 100 pounds total. Wired for 110 VAC 50/60 Hz
ECG/Sa02/NIBP patient monitor - $1,275 each
List: $8,200. MedCon: VG. Marquette series 7000 patient monitor.
Features 5 lead ECG, 2 invasive blood pressures, temperature, respiration, non-invasive blood
pressure (NIBP) and SaO2 (pulse oximetry). About 9 years old, these units are computer- controlled,
and will display up to 4 traces side by side (2 ECG traces, 1 blood pressure and 1 respiration).
Patient data is collected in a removable, battery operated tram so data collection module may be
transported with patient.
Machine has a number of automatic calculations, including QRS, cardiac volumes and others. Includes patient ECG
cable. 4 units in stock.
Patient monitor, 6 parameter - $975 each
List: $6,340 each. MedCon: EX. Hewlett Packard bedside monitors, model 78532B. May be tied into
a central monitoring system or used stand-alone. These monitors display the following parameters:
ECG. Has controls for alarms on/off, limit set points, size, lead select and setup.
Respiration. This may be set up for apnea alarms, apnea time, high respiration rate and other
adjustable alarms.
Invasive blood pressures. This may be set up for which pressure to monitor (1 or 2), alarm parameter (mean,
systolic, etc.), label and mercury calibration.
Hemodynamics (NBP + P3). Consists of a cardiac output calculation and a second invasive blood pressure. This
displays both injection temperature and blood temperature, and calculates differences in temperature. allows
file:///C:/web/pmonitor/pmon.htm
78/80