Download Video Projector
Transcript
Reality Creation [REALITY CREATION] Adjusts the detail and noise processing of images. (Super-resolution function) On: Applies detail and noise processing effects. Resolution: When you increase the setting value, the texture and detail of the picture become sharper. Noise Filtering: When you increase the setting value, the noise (picture roughness) becomes less prominent. Test: On/Off: Changes “On” and “Off” at a certain frequency to check the effect of “Reality Creation.” Tip The display position of status during the test works together with the “Menu Position” (1 page 57) setting. Off: The “Reality Creation” function is not applied. Cinema Black Pro Advanced Iris [ADVANCED IRIS] Switches the iris function. Auto Full: Automatically adjusts to optimize the iris aperture according to the brightness level of the input source. Moreover, signal processing, which optimizes gradation expression between the peak light and dark parts, expresses a large dynamic range. This results in a bright and high contrast image. Auto Limited: A lower brightness than Auto Full, making the image suitable for viewing in a dark room. Manual: Manually (fixed) adjusts the iris. Off: Disables the iris (aperture) function. Lamp Control Switches the lamp output. High: Increases the brightness, and projects brighter images. Low: Decreases the brightness, and enhances blacks by minimizing brightness. Tip Setting “Low” reduces fan noise, while also reducing energy consumption for longer lamp life. Motionflow Film Projection Reproduces an image similar to that of projected film. Use this setting as preferred, based on the image content. On: Reduces afterimage. Off: The reduction effect of afterimage is less than the “On” setting. The picture will become brighter. Motion Enhancer [MOTION ENHANCER] Reproduces fast-moving pictures smoothly without generating afterimages. High: Select this for picture quality smoother than “Low.” Low: Select this for smooth picture quality. Off: Select this to not apply the motion enhancer function. Tip Certain scenes may contain digital signal artifacts. In this case, set this function to “Off.” 50