Download User`s Manual

Transcript
2. Setup
Step 3 Connecting the Cable
Connecting the connection cable to the Expansion Adapter
Refer to the user’s manual for the expansion adapter EAD-CE-LPE, EAD-CE-EC to connect its
connection cable to the expansion adapter.
Connecting the connection cable to this product
Connect the connector of the connection cable to the connector of this product.
The interface connector is the leftmost connector on the rear panel of the expansion chassis.
The photo is of the ECH-PE-CE2-F4A.
Figure 2.8. Connecting the connection cable to this product
CAUTION
Do not plug the connection cable into any other connector as doing so can cause a fault.
Plugging the Power Cable
(1) Plug the power cable into this product.
The photo is of the ECH-PE-CE2-F4A.
Figure 2.9. Plugging the power cable into the ECH-PE-CE2-F4A
(2) Plug the power cable into a wall outlet.
ECH-PE-CE2-F4A
17