Download EIRM-EXTEND - Manual - Elinx Managed
Transcript
The basic commands in the Command Line Interface (CLI) are listed in the following table. System Management Command sys uptime sys date sys date –s MMDDhhmmYYYY.ss MM: Month DD: Day hh: Hour mm: Minute YYYY: Year ss: Second sys hostname sys hostname hostname sys snmp sys snmp disp sys snmp getcommunity sys snmp getcommunity CommunityName sys snmp setcommunity sys snmp setcommunity CommunityName sys snmp syslocation sys snmp syslocation location sys snmp syscontact sys snmp syscontact contact sys snmp sysdescr sys snmp sysdescr description sys snmp trapdest add IP sys snmp trapdest delete IP sys passwd sys actl on sys actl off sys actl disp 26 Command Description Display system uptime. Display system date and time. Set system date and time. Display system name. Set system name. Display SNMP settings. Display SNMP settings. Display SNMP GetRequest community. Set SNMP GetRequest community. Display SNMP SetRequest community. Set SNMP SetRequest community. Display location of the device. Set location of the device. Display contact person for the device. Set contact person for the device. Display description of the device. Set description for the device. Add destination IP address of SNMP trap. Delete destination IP address of SNMP trap. Set new password. Set access control ON to the device. Set access control OFF to the device. Display access control settings. Manual Documentation Number: EIRM-EXTEND-1412m B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com