1
Download Series 90-30, State Logic Processor Module
Transcript
2 State Logic Processor Module (SLP) GFK-0733A Î Î Î Î ÎÎ ÎÎ ÎÎÎÎÎÎ a45126 CPU BASEPLATE C S P L U P PC DISCRETE/ANALOG/OPTION Î Î Î Î Î Î ÎÎÎÎÎÎÎÎ ÎÎ Î Î Î Î Î ÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎ ÎÎ ÎÎ ÎÎÎÎÎÎ Î Î ÎÎ Î Î ÎÎ ÎÎ Î ÎÎÎÎ EXPANSION BASEPLATE DISCRETE/ANALOG/OPTION EXPANSION BASEPLATE NOTE TOTAL MAXIMUM DISTANCE FROM MAIN BASEPLATE TO LAST EXPANSION BASEPLATE IS 50 FEET (15 METERS) I/O EXPANSION CABLES IC693CBL300 3 FEET (.9 METERS) IC693CBL301 6 FEET (I.8 METERS) IC693CBL302 50 FEET (15 METERS) DISCRETE/ANALOG/OPTION EXPANSION BASEPLATE DISCRETE/ANALOG/OPTION Î Î Î Î ÎÎ Î ÎÎ Î Î Î ÎÎÎÎÎ ÎÎ ÎÎ ÎÎ EXPANSION BASEPLATE LEGEND: SLP STATE LOGIC PROCESSOR CPU MODEL 331 OR 341 CENTRAL PROCESSING UNIT I/O BUS TERMINATOR PLUG 1C693ACC307 DISCRETE/ANALOG/OPTION Figure 1. SLP Module in an IC693 PLC System Configuration Installation D Installation should not be attempted without referring to the State Logic Processor User’s Guide (see reference 1). D The IC693 SLP can only be installed in an IC693 The module should power up and blink the top LED, indicating that power up diagnostics are in progress. When the diagnostics have completed successfully the top LED stays on. PLC system that uses a model 331 or 341 CPU. D Make sure baseplate power is off. D Connect the battery to either of the battery connectors on the module. (See figure 2) D Install the SLP Module in the baseplate. (Refer to figure 1) D Turn on power. Memor y The SLP module has 46 Kbytes of user program memory space. Additional memory exists for Input, Output, Register, and other variable data (see table 3). The battery which supports this memory is located on the SLP module as shown in figure 2.
