Download AT89LP Developer Studio User Guide

Views and Windows
5.8
Static Memory View
The ‘Static Memory View” provides a view of the microcontroller’s code and data memory. The ‘Static
Memory View’ is shown in Figure 5-8. This is a static view and reflects the state of the memories right
after the part has been programmed.
Figure 5-8.
5.9
The Static Memory View
Editor Window
LP Studio implements a basic editor for code entry. Its functionality is similar to NotePad in Windows.
5.10
Calculator Window
LP Studio has an interactive Calculator Tool which automatically generates the initialization values for
the baud rate generator, pulse width modulator, and timeout calculator.
The Calculator window shows the three different types of peripheral calulators; baud rate(Figure 5-9),
pulse width modulator(Figure 5-10), and timeout(Figure 5-11). The user inputs the requires criteria (i.e.
frequency, clock divider, duty cycle), then clicks the ‘Calculate’ button. The calculator generates the correct initialization values for use in the source code.
AT89LP Developer Studio User Guide
5-5
3711B–MICRO–04/10