Download LinMot - Profilex Systems
Transcript
LinMot CANopen Interface 13 Reset Parameters to default values on E1100 There are three options to reset the parameters of a LinMot E1100 controller to default values: 1) 2) 3) By manipulating the two rotary hex switches: - Power Off the controller - Set the switches to FF - Power On the controller - Set the switches to 00 - Wait for 10 s - Power Off the controller By writing Index 2000h sub-index 7h, 8h, 9h, Ah of the Object dictionary. After changing the ROM values, a Reset should be performed either by a NMT Reset command or by Power OFF and ON the controller. Reinstall the firmware will always reset the parameters to default values Page 34/38 User Manual CANopen Interface / 23/05/11 NTI AG / LinMot