Download Control and Automation

Transcript
ASTAT SD
Soft starters for 3ph motors up to 20 kW
Solid state soft starter for 3ph AC motors up to 20kW
Working voltage up to 500VAC
With built-in analogue control panel
Three phase - full wave control (6 thyristors)
Excellent basic functions
Motorstarters
•
•
•
•
•
A
Analogue control panel
Technical data
Ratings
3ph AC systems
B
Frequency range
C
up to 440V, + 10%, - 15% for types QS1_NA
up to 500V, + 10%, - 15% for types QS2_NA
49 - 62 Hz
Control specifications
Control system
Initial voltage (pedestal)
Starting torque
Kick start
Motor current (Im)
Current limitation
Acceleration ramp time
Energy savings
Override
Soft stop time
D
E
F
Digital system with microcontroller. Starting ramp with
progressive increase in voltage and current limitation
40% - 90% Un
15% - 80% Mdir.start
90% Un (80% Mdir.start), 400ms
0.5 to 1 Ir (nominal ASTAT)
2 to 5 x Ir
0.5 to 60 s
Output voltage reduction according to power factor
Fixed output voltage permanently equal to supply voltage
Max. 2 x t acceleration time
Operation
External control
Acceleration phase
Permanent phase (choice)
Stop phase (choice)
G
H
Start - Stop
Adjustable time
Energy savings / Override
Power cutt-off / Ramp
Inputs / Outputs
Input
Output
I
Two optical couplings for Start/Stop
One relay either Run or End of ramp (1NO)
Protections
X
Order codes ! page D.73
Diagrams ! page D.74
Dimensions ! page D.76
D.72
D.72
Current limit
Loss on input phase
Thyristor short-circuit
Loss on output phase
Supply frequency error
Error (CPU)
Adjustable from 2 to 5 Ir
Trip at 3 sec.
Trip at 200 ms
Trip at 3 sec.
Will not start if f < 4a8Hz or f > 62Hz
60ms