Download User`s Manual

Transcript
6.2.2 COM port MINI-DIN
Pin
Name
1
GPIN1
Description
Opto-coupled GPIO Input. Input high when opening the connection;
input low when sinking more than 10mA or shorting to pin 5 (GND)
2
RXD
Receive Data
3
TXD
Tr a n s m i t D a t a
4
-
No connection
5
GND
System Ground
6
-
No connection
7
-
No connection
8
Relay_NO
9
Relay_COM
Relay Common point
Relay Normal Open point. It will set to on (Short with Relay_COM)
when set GPIO output high.
6.3 Update custom web pages
PiXORD VOS has a built-in web server, so the web contents are contained in Flash
Memory, the same as software parts, allowed to erase and re-written. It provides an
easy way to update the web pages --- just simply load and issue command from
network (FTP and Telnet).
Caution: The update of content page is very sensitive to system operation; therefore,
incorrect operation may cause system fail to response to any request. The following
operations provided here are only for experienced system integrator. Remember that
always consult to your distributor or dealer in advance to update the content.
The following procedures are to update the web page:
Clean up system
Before updating the pages, make the PiXORD VOS back to factory default stage
--- click “Load Default” button, click “Save Changes” button, and then click
“Reboot System” button in configuration page. Keep the PiXORD VOS in an idle
state, which stops all video requests from other station.
Download complete web pages
For backup purpose, we should download the complete built-in contents before
updating. The pages layout is described as below:
3.0.0/WWW: Main video pages including static HTML pages and JAVA
applets.
35
/
38