Download Manual

Commands of the menu View
7
Commands of the menu View
The menu View contains the following commands:
Symbol bars
Toggles the different symbol bars
Status bar
Toggle the status bar
Move origin left
Shifts the start address of the current 1 to the
left
Move origin right
Shifts the start address of the current 1 to the
right
More columns
Increases the number of columns by 1
Less columns
Decreases the number of columns by 1
Percent & Co.
Changes the way the differences are
displayed, if factor and offset are used and if
the version values are used
Right side
Allows you to change the view mode of the
right side and whether the right side should be
fixed or not.
Zoom
Enlarges the display
Scale 100%
Resets the display to its standard value (2d
only)
Unzoom
Makes the display smaller
Connect dots / Fill
surfaces
Connects the separate dots with lines (2d
only)
Fill the surfaces with colour (3d only)
Show Rowmarkers
Visualises the (imaginary) rows by lines (2d
only)
Differences
Shows the differences of the current map as a
list
- first
Moves to the first difference in the current map
- previous
Moves to the previous difference in the current
map
- next
Moves to the next difference in the current
map
(C) 2007 EVC electronic
97