Download NAVIOP GENIUS 7G Operating Instructions

NAVIOP GENIUS 7G
Operating Instructions
Basic User’s Manual for NAVIOP GENIUS 7G
Touchscreen Products
NAVIOP S.P.A.
NAVIOP_GENIUS7G
Ver. 1.00
NAVIOP GENIUS 7G - Operating Instructions
Copyright © 2014 NAVIOP S.P.A. – Forlì, Italy
Subject to change without notice
The information contained in this document is provided for informational purposes only. While efforts were made
to verify the accuracy of the information contained in this documentation, it is provided “as is” without warranty
of any kind.
Third-party brands and names are the property of their respective owners.
www.NAVIOP.com
2
NAVIOP GENIUS 7G - Operating Instructions
Table of Contents
Table of Contents
Introduction..............................................................................................................................................4
Safety Guide............................................................................................................................................5
1 Product Overview.................................................................................................................................6
2 Standards and Approvals.....................................................................................................................7
3 Technical Specifications ......................................................................................................................8
4 Technical Data....................................................................................................................................10
4.1 Dimensions...................................................................................................................................... 11
4.2 Installation Environment..................................................................................................................12
4.3 Installation Procedure......................................................................................................................13
5 Connections.......................................................................................................................................14
5.1 Serial Port........................................................................................................................................15
5.2 Ethernet Port...................................................................................................................................16
5.3 Optional plugin module....................................................................................................................17
6 Power Supply, Grounding and Shielding............................................................................................19
7 Battery................................................................................................................................................20
8 Cleaning Faceplates...........................................................................................................................21
9 Getting Started...................................................................................................................................21
10 System Settings...............................................................................................................................22
11 Unpacking and Packing Instructions................................................................................................24
3
NAVIOP GENIUS 7G - Operating Instructions
Introduction
Introduction
The operational guidelines described below is information which relates to the device, installation, transportation, storage, assembly, use and maintenance.
This Operating Instruction describes the main features of the NAVIOP operator panels. The Manual
refers to the following models:
GENIUS 7G
Operator interface with TFT color 7” widescreen display touchscreen and 1Ghz CPU
4
NAVIOP GENIUS 7G - Operating Instructions
Safety Guide
Safety Guide
The manual contains safety standards that must be respected for the personal safety and to avoid damage.
Indications of attention are divided into three levels of severity:
DANGER: indicates a failure to observe safety rules and such failure may cause death or serious injuries.
!
DANGER
ATTENTION: indicates a failure to observe safety rules and that deficiency may cause damage.
!
ATTENTION
CAUTION: indicates a failure to observe safety rules and that deficiency may cause defects to the
equipment or inconsistencies.

CAUTION
5
NAVIOP GENIUS 7G - Operating Instructions
Product Overview
1 Product Overview
The NAVIOP GENIUS 7G products combine state-of-the-art features and top performance with an
oustanding design. They are the ideal choice for all demanding HMI applications including factory
energy and marine applications.
The GENIUS 7G features a high-brightness, contrast-enhanced ruggedized 7” TFT widescreen
(16:9) display with a fully dimmable LED backlight. The product has been designed for use in harsh
environments and outdoor applications.Glass bonding assembly and anti-reflective (AR) glass surface
treatment provide for superior optical performance. The durable glass touchscreen requires the human
touch, eliminating false activations, and offers high reliability and durability; it will continue to work
even surface is scratched or contaminated.
The GENIUS 7G panels have been designed to run the JMobile software.
• JMobile runtime included. Full compatibility with JMobile Studio.
• Full vector graphic support. Native support of SVG graphic objects. Trasparency and alpha
blending.
• Full object dynamics: control visibility and transparency, move, resize, rotate any object on screen.
Change properties of basic and complex objects.
• TrueType fonts.
• Multilanguage applications. Easily create and manage your applications in multiple languages to
meet global requirements. Far East languages are supported. Tools available in JMobile Studio
support easy third-party translations and help reducing development and maintenance costs of the
application.
• Data display in numerical, text, bargraph, analog gauges and graphic image formats.
• Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed
actions (daily and weekly schedulers, exception dates), recipes, users and passwords, RSS feeds,
rotating menus.
• Includes support for a wide range of communication drivers for Factory systems.
• Multiple drivers communication capability.
• Remote monitoring and control. Client-Server functionality.
• Remote maintenance and support with VNC-based functionality.
• Off-line simulation with JMobile Studio.
• Powerful scripting language for automating HMI applications. Script debugging improves efficiency
in application development.
• Rich gallery of vector symbols and objects.
• Project templates.
• Optional plug-in modules for fieldbus systems, I/O and controllers.
• Display backlight dimmable to 0%.
• Mediaplayer widget
• IP Network camera widget
• Optional CoDeSys SoftPLC.
• CPU ARM Cortex-A8 - 1Ghz
6
NAVIOP GENIUS 7G - Operating Instructions
Standards and Approvals
2 Standards and Approvals
The products have been designed for use in an industrial environment in compliance with the 2004/108/
EC EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN60945
EN 60079-0
EN 60079-15
EN 60079-31
The installation of these devices into the residential, commercial and light-industrial environments is allowed only in the case that special in measures are taken in order to ensure conformity to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive
2002/95/EC
In compliance with the above regulations the products are CE marked.
7
NAVIOP GENIUS 7G - Operating Instructions
Standards and Approvals
Product Identification
The product may be identified through a plate attached to the rear cover. You will have to know the type
of unit you are using for correct usage of the information contained in the guide.
An example of this plate is shown in the figure below:
GENIUS 7G
ETOP507U5P1
01/12
09994847559
040100A01000000
product model name
product part number
month/year of production
serial number
version id of the product
3 Technical Specifications
Touch screen technology
Projective Capacitive
Back-up battery 3V 50mAh Lithium, rechargeable, not user-replaceable, model VL2330.
FuseAutomatic
Serial Port RS-232, RS-485, RS-422 software configurable
User memory
Flash 256MB GENIUS 7G
Recipe memoryFlash
Hardware clock
Clock/Calendar with back-up battery
Accuracy RTC (at 25°C)<100ppm
Environmental conditions
Operating temperature (surrounding
air temperature)
Storage temperature Operating and storage humidity Vibrations Shock
Protection class -20 ÷ +60°C (vertical installation)
-20 ÷ +50°C (horizontal installation)
-40 ÷ +85°C
5 ÷ 85 % RH not-condensing
5 ÷ 9 Hz, 7 mm p-p 9 ÷ 150 Hz, 1 g
± 50 g, 11 ms, 3 pulses per axis
IP69K (front panel) IP20 (rear)
EN60068-2-14
EN60068-2-14
EN60068-2-30
EN 60068-2-6
EN60068-2-27
EN 60529
8
NAVIOP GENIUS 7G - Operating Instructions
Standards and Approvals
Electromagnetic Compatibility (EMC)
Radiated disturbance test Electrostatic discharge immunity test Class A EN 55011
8 kV (air electrostatic discharge) EN 61000-4-2
4 kV (contact electrostatic discharge)
Radiated, radio-frequency, electromagnetic field immunity test
Burst immunity test
Surge immunity test
80 MHz ÷ 1 GHz, 10V/m 1,4 GHz ÷ 2 GHz, 3 V/m
2 GHz ÷ 2.7 GHz, 1 V/m
± 2 KV dc power port
± 1 KV signal line
± 0,5 KV dc power port (line to earth)
± 0,5 KV dc power port (line to line)
± 1 KV signal line (line to earth)
EN 61000-4-3
Immunity to conducted disturbances
inducted by radiofrequency field 0.15 ÷ 80 MHz, 10V EN 61000-4-6
EN 61000-4-4
EN 61000-4-5
Voltage dips, short interruptions and
voltage variations immunity test
Port: AC mains; Level:
100% duration: 1 cycle and 250 cycles (50Hz); 40% duration: 10 cycles (50Hz);
70% duration: 25 cycles (50Hz);
Phase: 0°-180°
Test executed on the 230Vac side of the Exor International S.p.A. Power Supply
EN 61000-4-11
Durability information
Backlight service life
(LED type)
40000 Hrs. or more
(Time of continuos operation until the brightness of the
backlight reaches 50% of the rated value when the sorrounding air temperature is 25°C) - see Note 1
Note 1: Extended use in environments where the surrounding air temperature is 40°C or higher may
degrade backlight quality/reliability/durability.
Surface Chemical Resistance:
Alcohol, Acetone, Methylene Chloride, Isopropanol, Hexane, Methyl ethyl ketone, Turpentine, Mineral
Spirit, Unleaded Gasoline, Diesel Fuel, Coal oil, Motor oil, Transmission Fluid, Antifreeze, 10% NaClO,
6% Hydrochloric Acid, 40% Sulfuric Acid, 70% Nitric Acid, 5% Ammonia, 10% Sodium Hydroxide, 3%
Hydrogen Peroxide, Toluene, Ammonia-based Glass Cleaner, Laundry Detergents, Cleaner, Black Tea,
Coffee, Vinegar, Coca Cola, Grease, Cooking Oil, Salt, Bleach
9
NAVIOP GENIUS 7G - Operating Instructions
Technical Data
4 Technical Data
Model
Display / Backlight
Colors
Resolution
Diagonal (inches)
Dimming
User memory flash
SD card slot
Recipe memory
TFT Color / LED
GENIUS 7G
TFT Color / LED
64K
64K
800X480
800x480
7” widescreen
7” widescreen
yes
yes
128MB
256MB
yes yes
Yes. Flash memory storage
limited only by available
memory
Yes. Flash memory storage
limited only by available
memory
RS-232,RS-485
RS-422 DB9 female
software configurable
RS-232,RS-485
RS-422 DB9 female
software configurable
Ethernet port
2 10/100 Mbit with integrated
switch
2 10/100 Mbit with integrated
switch USB port
2 Host interface, 1 version 2.0,
1 version 2.0 and 1.1
2 Host interface, 1 version 2.0,
1 version 2.0 and 1.1
Serial Port
@@@@@
Expansion slot
Battery
Real Time Clock
Voltage
2 Optional Plugin
rechargeable
yes
10-32Vdc (*)
2 Optional Plugin
rechargeable
yes
10-32Vdc (*)
Current rating (at 24VDC)
0.7A
0.7 A
Weight
1 Kg
1 Kg
(*) For applications requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage dips, the
minimum power supply voltage is 18Vdc.
10
NAVIOP GENIUS 7G - Operating Instructions
Technical Data
4.1 Dimensions
Cut out
MODEL
GENIUS 7G
MODEL
GENIUS 7G
A
B
C
D
E
F
187mm/7.36”
147mm/5.79”
176mm/6.90”
136mm/5.35”
47mm/1.85”
8mm/0.31”
CSD
CSD2
500mm/19.68”
350mm/13.77”
CSD=Minimum Compass Safe Distance of standard compass
CSD2=Minimum Compass Safe Distance of steering compass, standby steering compass, emergency
compass
11
NAVIOP GENIUS 7G - Operating Instructions
Technical Data
4.2 Installation Environment
Avoid prolonged exposition to direct sunlight to avoid the risk of overheating the device.
The equipment is not intended for installation in contact with corrosive chemical compounds. Check the
resistance of the front panel to a specific compound before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel.
In order to meet the front panel protection classifications, proper installation procedure must be followed:
• the borders of the cutout must be flat
• screw up each fixing screw until the plastic bezel corner get in contact with the panel.
• the cutout for the panel must be of the dimensions indicated in this manual.
The IP69K is guaranteed only if:
• max deviation from the plane surface to the cut-out: <=0.5mm
• thickness of the case where is mounted the equipment: from 1,5mm to 6mm
• max surface roughness where the gasket is applied: <=120 um
Applying the gasket
A. Gasket
B. Installation cut-out
12
NAVIOP GENIUS 7G - Operating Instructions
Technical Data
4.3 Installation Procedure
Place the fixing brackets as shown in figure.

CAUTION
Screw each fixing screw until the bezel corner gets in contact with the panel.
13
NAVIOP GENIUS 7G - Operating Instructions
Connections
5 Connections
1. Serial Port
2. 2x Ethernet Port
3. USB Port (version 2.0 - 1.1)
4. USB Port (version 2.0 High speed only)
5. Power Supply
6. Expansion slot for Plugin module
7. SD Card Slot
14
Connections
NAVIOP GENIUS 7G - Operating Instructions
5.1 Serial Port
The serial port is used to communicate with the PLC or with another type of controller.
Different electrical standards are available for the signals in the PLC port connector: RS-232, RS-422,
RS-485.
The serial port is software programmable. Make sure you select the appropriate
interface in the programming software.
RS-422, RS-485
RS-232
PinDescription
1
GND
2
3
TX
4
RX
5
6
+5V output
7
CTS
8
RTS
9
SERIAL PORT
PinDescription
1
GND
2
3
CHA4
CHB5
6
+5V output
7
CHB+
8
CHA+
9
To operate in RS485 pins 4-3 and
8-7 must be connected externally.
The communication cable must be chosen for the type of device being connected.
15
NAVIOP GENIUS 7G - Operating Instructions
Connections
5.2 Ethernet Port
The Ethernet port have two status indicators. Please see description in figure.
1
OFF: Valid link has NOT been detected
ON: Valid link has been detected
8
ON: No activity
BLINKING: Activity
16
NAVIOP GENIUS 7G - Operating Instructions
5.3 Optional plugin module
GENIUS 7G have several optional plugin module, multiple modules configurations are possible.
Slot#2 and Slot#4 are available only if plugin module has the “bus extension connector”.
Each slot carries three communication channels:
•
1 serial interface
•
1 CAN interface
•
1 SPI interface
Note: It is not possible to stack two modules that are using the same type of interface.
17
NAVIOP GENIUS 7G - Operating Instructions
Below you can find relation between modules and max number of modules that can be used into eTOP500
serie panels, based on their Interface Type:
Module
Application
Max Modules
Interface Type
Bus Extension
connector
PLCM01
CAN
2 for GENIUS 7G
CAN
Y
PLCM01-NE
CAN
2 for GENIUS 7G
CAN
N
PLCM02
KNX
1
Serial
N
PLCM03
Serial RS232
2
Serial
Y
PLCM04
Serial RS485
2
Serial
Y
PLCM05
CODESYS V2
License
1
PLCM06
Profibus DP
1
SPI
N
PLIO03
Multifunction I/O
1
SPI
N
PLIO06
Compact I/O
2
SPI
N
Y
Max modules refers to max number of modules can be plugged into the HMI (all slots),
If you are planning to use PLCM03 and PLCM04 (additional serial ports) you will obtain following “COM
- Slot#” association:
•
a module plugged in Slot#1 or into Slot#2 will be COM2,
•
a module plugged in Slot#3 or into Slot#4 will be COM3.
If you are planning to use two PLCM01 (CAN interface) you will obtain following Slot# association:
•
a module plugged in Slot#1 or into Slot#2 will be the CanPort 0,
•
a module plugged in Slot#3 or into Slot#4 will be the CanPort 1.
18
Power Supply, Grounding and Shielding
NAVIOP GENIUS 7G - Operating Instructions
6 Power Supply, Grounding and Shielding
The power supply terminal block is shown in the figure below.
Fig. 6.1
Note: Ensure that the power supply has enough power capacity for the operation of the equipment.
The unit must always be grounded to earth. Grounding helps limit the effects of noise due to electromagnetic interference on the control system.
Earth connection will have to be done using either the screw or the faston terminal located near the power
supply terminal block. A label helps identify the ground connection. Also connect to ground the terminal
3 on the power supply terminal block.
The power supply circuit may be floating or grounded. In the latter case, connect to ground the power
source common as shown in figure (see below) with a dashed line.
When using the floating power scheme, note that the panes internally connects the power common to
ground with a 1MΩ resistor in parallel with a 4,7nF capacitor.
The power supply must have double or reinforced insulation.
The suggested wiring for the power supply is shown below.
Fig. 6.2
All the electronic devices in the control system must be properly grounded. Grounding must be performed
according to applicable regulations.
19
Battery
NAVIOP GENIUS 7G - Operating Instructions
7 Battery
These devices are equipped with rechargeable Lithium battery, not user-replaceable.
The following information is maintained by the battery:
•
hardware real-time clock (date and time)
Charge:
At first installation must be charged for 48 hours.
When the battery is fully charged, it ensures a period of 3 months of data back-up at 25°C.
Battery
!
ATTENTION
Dispose of batteries according to local regulations.
20
NAVIOP GENIUS 7G - Operating Instructions
Cleaning Faceplates / Getting Started
8 Cleaning Faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
9 Getting Started
NAVIOP GENIUS series panels must be programmed with the programming software JMobile Studio.
To program a panel you will have to connect the panel to a personal computer running JMobile Studio
software package; the panel must be in Configuration mode to be programmed. NAVIOP GENIUS series
units are programmed via the Ethernet interface.
The software package JMobile is a WindowsTM application and must be properly installed.
JMobile uses the personal computer Ethernet interface to communicate with the target device. Make
sure that the proper firewall policy is configured in order to allow JMobile Studio to access the network.
The version of the JMobile Studio used must be compatible with the JMobile runtime version installed
on the panel to be programmed.
21
NAVIOP GENIUS 7G - Operating Instructions
System Settings
10 System Settings
unit.The System settings tool comes in the shape of a rotating menu with navigation buttons at top and
The NAVIOP GENIUS panels have a system settings tool to allow basic and preliminary settings to the
unit.The System settings tool comes in the shape of a rotating menu with navigation buttons at top and
bottom to scroll between the available options. The tool is shown in the picture below.
On the left side the several components and functions are highlighted and, per each of them, the right
side (“Info” pane) shows the information about the current version, when applicable. In the picture
below it is showed the version of the Main OS component.
System Settings has two operating modes:
User Mode and System Mode.
The difference between them is only in the number of available options.
System settings in User Mode is activated from the context menu. The context menu can be recalled
by clicking and holding any unused area of the touchscreen for a few seconds. Default holding time is
2 sec. Holding time is a runtime parameter that can be changed.
System settings in System Mode can be activated with the so-called Emergency system access
procedure. This procedure consist in tapping in the middle of the touchscreen with a finger at a high
frequency while the systemis powering up. The Emergency procedure can only be accessed at powerup.
22
NAVIOP GENIUS 7G - Operating Instructions
System Settings
“User mode” is the simplest possible interface where a generic user can get access to the basic
settings of the panel:
Calibrate Touch: allows to calibrate the touch screen interface
Network: allows to change the options of the panel on-board network card
Time: allows to change the panel RTC options, including time zone and DST
Display settings: automatic backlight turnoff and brightness adjustment
BSP settings: allows to check the BSP (Board Support Package) version (example 2.37), check the operating hours timers for the unit and separately for the backlight, enable/disable the buzzer
Plugin list:allows to check the presence of optional plugin
modules installed.
“System Mode” is the complete interface of the System Settings tool where all the available options
are available; in addition to the options available in the “User Mode” we have the following important
options:
Format Flash: allows to format the internal panel flash disk
Resize Image Area: allows to resize the flash portion reserved to store the splash screen image displayed by the unit at power up; default settings are normally ok for all the units
Download Configuration OS: allows to check current version and upgrade the back-up operating system, see below in the next chapter for additional details
Download Main OS: allows to check current version and upgrade the main operating system, see below in the next chapter for additional details
Download Splash Image: allows changing the splash screen image displayed by the unit at power up; the image should be provide in a specific format. We suggest to update Splash Screen Image directly from Studio software which supports this feature starting from V 1. 50
Download Bootloader: allows to check actual version of the system boot loader and to upgrade it, see below for additional details
Note: the System Settings tool includes also other options, not described and not documented at this
moment
23
NAVIOP GENIUS 7G - Operating Instructions
11
Unpacking and Packing Instructions
Unpacking and Packing Instructions
to repack the unit, please follow the instructions backwards.
24