Download OFS9020

lead to deterioration. This area should be cleaned regularly as cooking fats spit up and
stick to the ceiling and the element which will burn and smoke, giving out unpleasant
odours.
5) CLEANING OF OVEN DOOR
This glass can be soaked in hot soapy water or with special glass cleaners. The outer finish
glass should be cleaned with a specified glass and mirror cleaner only. Soapy water will
remove stains and so on but will leave streaks. Refer to Triple Glazed Oven Door Assembly
below for the ways to remove the glass from oven door. Oven door can be removed
according to the below instruction :
 Open the oven door completely
 Turn the brackets of the lower hinges upwards until hooking the upper hinges.
 Set the door ajar, then lift lightly to remove the lower hinges from the slots.
 Remove the door and the two upper hinges from their seats.
6) REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew
the glass protection cap and the bulb, replacing it with
another one suitable for high temperature 300℃.
It should be fit below points:
Voltage: 240V Power : 25W
E14
Reassemble the glass cap and reconnect the oven.
7) LATERALS GRIDS
The lateral grids can be removed from the chamber. Pull the grid pins at the oven chamber
lateral panels then pull the grid pins at the oven back panels and remove the grids. Reverse
the steps when inserting the grids back to the chamber.
Page 22
V 2.0