Download Manual

Chapter 2
 Defining multiple motion detection areas:
1) After satisfactory positioning of the first detection area as described above,
click the Add button again. A second default frame will pop-up on the
screen. Drag & resize the frame at the desired location.
2) Repeat the above step to add more detection area frames.
NOTE
Total defined motion detection areas cannot exceed 10 frames.
Figure 2-19 Defining Multiple Motion Detection Areas for the Camera
3) To assign unique names to each framed location for easy identification, click
on the frame and a Window Name text box with the default name of the
selected frame, will appear at the bottom of the pane (see figure below).
Enter a new name and click the Save button. Wait for a while for the change
to take effect.
Figure 2-20 Detection Frame “Window Name” Textbox
26  Setup Execution
RP-SB101W and RP-SB101WI Webpage Setting User’s Guide