Download Preface - Axis Communications

afp-mio.bk : fr_panel.frm Page 32 Thursday, January 11, 1996 2:38 PM
Section 3: Front Panel Operation
Setting the Twinax Address
Menu
With the printer off line, press the <Menu> key several times until "MIO
MENU" or "AUX IO MENU" is displayed.
Reset
Item
Press the <Item> key and "CFG=NO*" is displayed.
Continue
+
Press the <+> key until "CFG=TWIN OPT" is displayed.
Enter
Press the <Enter> key until "COUNTRY=XXX" is displayed.
Item
Press the <Item> key until "DEV ADDR=<X>*" is displayed.
Continue
Now you have the following possibilities to change the Device Address:
+
The <+> key will get you the next valid value. The <-> key will get you the
previous valid value.
Enter
The <Enter> key will store the displayed address.
An asterisk (*) indicates that this value is now stored.
Use the following key to leave the configuration menu:
On Line
Important:
32
Press the <On Line> key anytime you want to leave the configuration
menu.
Changing the Device Address will have no effect until the next Power
on.
AXIS AFP MIO (Twinax) User’s Manual