Download Heading 1 - UTC Digital

List Sync
Use this option to synchronize the users list and messages list with other UDI™ users in the group.
1. Place the UDI™ units with the antennas touching or as close
as possible to each other.
2. In the Setup menu of each unit, select List Sync and press
Enter.
3. Select UDI™ Status and press
Enter. The UDI™ Status
menu opens.
4. Select whether your UDI™ will
be sending synch data or
receiving synch data and press
Enter.
 Set the receiving UDI™
unit to Receiving.
 Then set the sending unit
to Sending.
5. In the Direct List Sync. menu,
select Start Sync. to start the
synchronization process.
Always make sure the
receiving device is started the
first.
DIRECT LIST SYNC.
1. UDI Status
2. Start Sync.
3. Setup
UDI STATUS
1. Sending
2. Receiving
DIRECT LIST SYNC.
1. UDI Status
2. Start Sync.
3. Setup
6. Press Enter. The display shows Updating…
7. When the update is complete, the display reverts to the
Direct List Sync menu.
In case of a possible failure in the communication, the cycle
will repeat automatically – till the receiving UDI™ will
prompt “Copy succeeds”.
NOTE: If the synchronization fails, restart the process from Step 3.
21