Download Heading 1 - UTC Digital

Use the Up/Down buttons to
define a contrast value and press
Enter. Make sure there are no
strips seen on the screen.
LCD CONTRAST
Contrast: 7
Units
Use this option to select Metric units (meters, degrees C) or Imperial units (Feet, degrees F) as your unit
of measurement.
UNITS
Select Imperial or Metric and press
1. Imperial
Enter. All units displayed on the
2. Metric
UDI™ will now conform to the unit
type chosen.
NOTE: The temperature displays according to your units selection – When you select Feet, Fahrenheit
degrees are shown, when you select Meters, centigrade degrees are shown.
About UDI
Use this option to view the UDI™ serial number and software version installed. Use this information when
contacting UTC about your UDI Boat unit.
ABOUT UDI
31/05/2008
S/N: B20-111007
19:36
Version:
Ver_25.01.2008
Care and maintenance
The UDI™ boat unit requires very little care or maintenance.
After every dive: wash the antenna and antenna cable. Wipe down the UDI™ boat unit and make sure
that the connectors are well covered (using caps) and are dry prior to connecting the UDI™ to the charger
or the PC.
Do not use a water jet or pressure from hose to clean the UDI, to prevent damage to the UDI™
mechanism.
Periodically the UDI™ boat unit may need to be serviced at an authorized laboratory for calibration and
battery replacement. Consult the UDI™ webpage for information.
Revert to factory setting:
In case you would like to revert to the original UDI™ factory settings, press the Up, Down and Enter
buttons simultaneously. Wait for the UDI to turn on and for the message “set default” appears on the
screen. All customizations and settings you have done will be erased, and UDI will turn on with the
original factory settings.
47