Download Communicator User Manual

Enter the service name, topic name, and command.
(Note: The service name, topic name, and command
differ according to the DDE program. Therefore, to
configure these settings, refer to the user manual of
the DDE program.)
- When set to "Other"
3. Click the "OK" button to initialize the DDE function with the settings you entered. (Note that if the
currently selected DDE program is Goldmine, it will automatically run.)
Using the DDE
1.
When the received call number is registered in the DDE program, its detailed information is displayed
on the screen.
Closing the DDE Function
1.
Select the DDE -> Close DDE from the system tray menu.
2. The DDE function stops.
148
© Samsung Telecommunications America