1
Download ScadaWorks Technical Reference Manual
Transcript
444 ScadaWorks Technical Reference Manual User's Guide Boolean Registers Click on the Boolean Registers button in the Main menu For booleans the following data types are shown like this. To change a read/write or temporary boolean, simply click on the button. Booleans setup for temporary writes have an Undo and Confirm button and the Confirm All and Abort All buttons show whenever the Temporary registers are written to. The Undo and Confirm on the register will operate on only the register at that line where as the Confirm and Abort All will operate on all registers that have been changed in this login's session. If a Temporary variable has not been written to, the Undo and Confirm buttons for that register's line are disabled. If Temporary registers are left in the unconfirmed state, then they will change back when the controller is reset.
