Download User guide EN

3.2
Editing a trip
Trip editing allows changing trip type, purpose. Provided the vehicle is not equipped with
CAN/FMS bus, it is essential to perform tacho recalculation, only actual tacho reading at the end
of the current trip is added to a trip. The application adjusts the log book after clicking the
"Recalculate" button.
Actual reading – is used to enter actual tacho reading at the end of selected trip. It is necessary
to use to options Odometer correction or Change odometer for the tacho recalculation.
Fuel – ending fuel level in tank at the end of trips
Calculation of ending fuel level – this option leads to estimate of actual fuel level at the end of
edited trip using the cost entered (fuelling information) and average consumption of the vehicle.
Consumption – Fuel consumed during a trip. This entry is filled in, when a flow meter is connected
to GPS unit.
Bookmark Crew is used for evidence of other passengers in the vehicle.
These can be added by using the button
HI Software Development s.r.o.
Legionářská 1319/10
779 00 Olomouc
Princip a.s.
Radlická 204/503
158 00 Praha 5
only by drivers defined in the application.
Technical support:
+420 731 641 133
[email protected]
21
www.webdispecink.cz